Affiliate Disclosure: This post contains affiliate links, which means I may earn a commission if you make a purchase through links on this site, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. I’m also a Walmart Creator (#WalmartPartner), so I earn from qualifying Walmart purchases too. My opinions are my own and don’t represent Walmart.
Wow, these are big. That was the first thing through my head once I had the box open, and the second was that I could finally do something with the huge wedding pictures I ordered. DoubleFill sent me a two-pack of these to try.
I ordered those pictures after we got married in 2011 and then left them alone for fifteen years. Every time I thought about framing one, I thought about what framing a 24 by 36 picture actually involves, and then I went and thought about something else.
Quick Verdict
- Buy it if: you have a large print or photo that needs to go up without a trip to a custom framer
- Skip it if: your walls can’t take screws and anchors, or you want something you can move around later
- My favorite feature: how clear the panels are once they’re clean
- Would I buy again? Yes
Why a floating acrylic frame looks different from a poster frame
A regular frame at this size puts a wood or metal border around your picture, and that border becomes part of what you’re looking at. These skip it. Two clear panels sandwich the picture, and the hardware holds the whole sandwich off the wall so the picture is the only thing with any weight to it.
Once a panel was clean I lifted it up in front of me and couldn’t tell I was holding it. That sounds like a small thing until you put a photo behind it and realize nothing about the acrylic is competing for your attention.

DoubleFill 2 Pack Frameless Floating Acrylic Picture Frames 24 x 36 Inch
Two clear double-panel acrylic frames for artwork up to 24 by 36 inches. The full panel measures 26 by 38. Chrome standoff hardware, screws, and wall anchors come in the box.
What size photo fits, and what comes in the box?
- Artwork it holds: up to 24 by 36 inches, and anything smaller leaves a clear border
- Full panel size: 26 by 38 inches, so plan your wall for that, not for 24 by 36
- Panel thickness: 3mm each, two panels per frame
- Material: the listing says grade A cast acrylic with over 95% light transmittance
- Protection: UV resistant and shatterproof, which matters more than it sounds at this size
- Mounting hardware: chrome standoffs, screws, and wall anchors included
- Orientation: horizontal or vertical, your choice
- Quantity: 2 frames
Who is a 24×36 acrylic frame actually for?
Anyone sitting on a big print, poster, or photo that hasn’t gone up yet. At 24 by 36 you’re usually looking at a trip to a framer, and that trip is easy to keep postponing. Postponing it is its own thing, and I wrote about why the next step gets skipped even when you know exactly what it is. If you’d rather keep the thing stored flat and safe than put it on a wall at all, poster sleeves in the same 24 by 36 size do that job instead. And if what you’ve got is long and narrow instead of big, the same brand’s 11×22 newspaper frames are the ones I’d point you at. If you’d rather not eyeball a frame that big, a laser line like the one on the DOVOH angle finder my sister and our dad tried marks the spot for you.
It’s aimed at homes, offices, and studios, and the two-pack is a real part of who it suits. Two frames means two walls, or one now and one when you find the next thing to hang. The people it suits least are renters and anyone whose walls are off limits, which is the same reason I ended up putting a magnetic ceiling light in a closet with no wiring instead of installing something.

How hard is a floating acrylic frame to put together?
Easier than I braced for. You lay one panel down, put the picture on it, lay the second panel on top, and drop the standoff barrels through the corner holes. That’s the whole build. It took minutes, and nothing about it needed a manual or a second opinion.
The one moment that got me was the protective film. It peeled off in one big satisfying sheet, and then underneath it there was another layer that looked exactly like a panel full of scratches. I thought I’d been sent a damaged one. It was just the second layer of film, and both sides of both panels have it. Once all of that was off, I set the finished frame up above the mantel and left it leaning there, because I still haven’t decided that’s where it’s going.

Three things I noticed before anything went together
- Protective corners on every panel: the acrylic arrived cornered and padded, which is the part cheap large-format packaging usually skips.
- Hardware bagged per frame: each frame’s screws, anchors, and barrels came in their own sealed bag inside one clear case. For a two-pack that means you build one frame without pulling apart a pile of identical parts.
- A tool included just for lifting the protective layer: two of them, actually, one per frame. A brand that ships you a dedicated tool for that has clearly heard from people who used a fingernail.
What held up once it was together
- The polished panel edges catch the light as a thin bright outline, and that outline is the only border you get.
- It reads like something a framer did, not like something that showed up flat in a box a day earlier.
Four things to know before you order
- You have to drill. The standoffs go up with screws and wall anchors and there’s no adhesive option in the kit. If putting holes in the wall is off the table, this isn’t your frame.
- Two layers of film, not one. The inner layer looks like damage. Knowing it’s there ahead of time saves you a bad thirty seconds.
- Centering the picture takes a second pass. Mine ended up sitting a little off inside the panel. It’s fixable by loosening a couple of the standoffs and nudging it, but it doesn’t land perfectly on its own obviously.
- A 26 by 38 panel is a lot to hold on to. I did the assembly on the floor for exactly that reason. Two clear sheets that size are awkward before they’re joined.
Questions I had before I ordered
Does the DoubleFill floating frame need to be drilled into the wall?
Yes. The standoffs mount with screws and wall anchors, both of which come in the box, and there’s no adhesive version in this kit. If your walls are off limits, this isn’t the right frame for you.
What size photo fits a 24×36 floating acrylic frame?
Anything up to 24 by 36 inches. The panel itself measures 26 by 38, so measure your wall for the bigger number. A smaller picture sits with a clear border all the way around it.
How do you change the photo in a floating acrylic frame?
You loosen the standoff caps and separate the two panels. There are no magnets in this kit, so a swap means taking the hardware apart rather than lifting a faceplate off the front.
Can these be mounted horizontally instead of vertically?
Yes. The standoff holes work in either direction, so a landscape print goes up as cleanly as a portrait one.
Can you use a floating acrylic frame for a poster or a diploma?
Yes. The panels don’t care what sits between them as long as it’s flat and no bigger than 24 by 36. Posters, diplomas, and art prints all mount the same way a photograph does.
Three other 24×36 acrylic frames to compare
- ArtToFrames Floating Acrylic Frame 24×36 sells as one frame with a 28 by 40 panel, so a 24 by 36 print gets a wider clear border than it does here. Its faceplates are magnetic, so swapping art doesn’t mean opening the standoffs.
- AITEE Large Acrylic Floating Picture Frame 24×36 is a single frame on a 27 by 39 panel, the narrowest clear border of the three. Its kit is spelled out as four short screws, four long screws, four nuts, and four wall anchors.
- DistinctAndUnique Acrylic Floating Frames 2-Pack is the other two-pack here, and its standoffs come in black, white, gold, or metal rather than chrome only. Its front caps unscrew so a picture change doesn’t take the panel off the wall.
Would I use the second frame in the pack?
Yes. There are two empty walls in that room and the second frame is already sitting there waiting for me to pick one.
If you’ve got something large that’s been waiting on you the way mine was, this is the version I’d start with.
Where To Buy
A tool I built
Subscription Graveyard
Bury the subscriptions you’ve canceled, give each one a tombstone, and watch what you’re saving pile up.
Bury your first one →I run an affiliate program on the tools I build. Approved affiliates earn 20% on what their referrals pay, for up to a year. US only for now. See the program →
